High Energy Corp.,HT54 Series ceramic capacitors

Leaders in Oil-Filled and Ceramic High Voltage Capacitor Technology

HT54 Series

A
TYPE	L	D
HT 54	0.421	0.437

B
TYPE	L	D
HT 54	0.375	0.375

HT54 Series 5 KVDC

Body	Cap			Maximum Current Rating
TC	(pF)	Part No.	1 MHZ	10 MHZ	30 MHZ

NPO	1	HT54T109DA	.022*	.22*	.67*
	2	HT54T209DA	.044*	.44*	1.33*
	3	HT54T309DA	.067*	.66*	2.0*
	4	HT54T409DA	.089*	.88*	2.1
	5	HT54T509DA	.11*	1.1*	2.2
	6	HT54T609DA	.13	1.3*	2.3
	7	HT54T709DA	.15	1.5*	2.4
	8	HT54T809DA	.18	1.7*	2.5
	9	HT54T909DA	.20	1.9	2.6
	10	HT54T100DA	.22	2.2	2.8
	12	HT54T120KA	.26	2.5	2.9
	14	HT54T140KA	.31*	2.7	3.2

N-750	15	HT54T150KA	.33*	2.9	4.1
	20	HT54T200KA	.44*	3.6	5.3
	25	HT54T250KA	.55*	3.7	5.4
	30	HT54T300KA	.66*	3.7	5.5
	35	HT54T350KA	.77*	3.8	5.6
	40	HT54T400KA	.89*	3.8	5.6

*Data is based on not exceeding the maximum rated voltage. All other data is based on a 30�C rise above a 25�C ambient in still air.

NOTES:

1. Reactive power ratings (KVAR) can be calculated from given currents. Within given frequency limits the following equation applies:

2. Capacitor data is based on actual tests of current necessary to obtain a 30�C rise. In operation, capacitors may be driven to a 50�C rise over a 25�C ambient and still have a 10�C service factor.

3. Final suffix "A" designates terminal cap. For wire termination, change suffix to "B".

4. Capacitance tolerance is �.5 pF with letter "D" as second from end in part number, or is �10% pF with letter "K" as second from end in part number. For tighter tolerance part change "D" to "C" for �.25 pF and change "K" to "J" for �5% pF.

Oil-Filled | Ceramic | Custom Applications | What's New | Sales Reps | Guest Book | Home | Back | Downloads

High Energy Corp.

PO Box 308 / Lower Valley Road

Parkesburg, PA 19365

610-593-2800 FAX 610-593-2985