High Energy Corp., HT55 series ceramic capacitors

Leaders in Oil-Filled and Ceramic High Voltage Capacitor Technology

A
TYPE	L	D
HT 55	0.390	0.312

B
TYPE	L	D
HT 55	0.343	0.281

HT55 Series 5 KVDC

Body	Cap			Maximum Current Rating
TC	(pF)	Part No.	1 MHZ	10 MHZ	30 MHZ

NPO	1	HT55T109DA	.022*	.22*	1.2
	2	HT55T209DA	.044*	.44*	1.3
	3	HT55T309DA	.067*	.66*	1.4
	4	HT55T409DA	.088*	.88*	1.5
	5	HT55T509DA	.11*	.90	1.7
	6	HT55T609DA	.13*	.92	2.1
	7	HT55T709DA	.16*	.95	2.2

N-750	8	HT55T809DA	.18*	.96	2.4
	9	HT55T909DA	.20*	.97	2.5
	10	HT55T100DA	.22*	.98	2.8
	11	HT55T110KA	.24*	1.0	2.9
	12	HT55T120KA	.27*	1.0	2.9
	13	HT55T130KA	.29*	1.1	3.0
	14	HT55T140KA	.31*	1.1	3.0
	15	HT55T150KA	.33*	1.1	3.0

*Data is based on not exceeding the maximum rated voltage. All other data is based on a 30�C rise above a 25�C ambient in still air.

NOTES:

1. Reactive power ratings (KVAR) can be calculated from given currents. Within given frequency limits the following equation applies:

2. Capacitor data is based on actual tests of current necessary to obtain a 30�C rise. In operation, capacitors may be driven to a 50�C rise over a 25�C ambient and still have a 10�C service factor.

3. Final suffix "A" designates terminal cap. For wire termination, change suffix to "B".

4. Capacitance tolerance is �.5 pF with letter "D" as second from end in part number, or is �10% pF with letter "K" as second from end in part number. For tighter tolerance part change "D" to "C" for �.25 pF and change "K" to "J" for �5% pF.

High Energy Corp.

PO Box 308 / Lower Valley Road

Parkesburg, PA 19365

610-593-2800 FAX 610-593-2985